Lund Racing nGauge Recovery Files (FW326)

Avatar
Jon Jr.
Follow

The attached file, SD.zip, contains all the required files needed for your Lund Racing nGauge. To use this files, unzip them onto the micro SD card. If for any reason your SD card fails or you lose it, these files will be needed to create a new SD card.

  1. Place the files onto your SD card, one of two ways:
     
    1. Via USB to nGauge connection:
      1. Connect nGague to PC via mini USB cable via.
      2. Go to "Settings > USB SD" in your nGauge menus. nGauge should then be recognized as a drive by your PC.
      3. Place the downloaded files on the root of your SD Card. Do not rename the files.
          Older firmware files can stay.SD Root Directory
      4. Go to Step 2.
         
    2. Via SD Card inserted into PC (if you have a microSD adapter):
      1. Remove SD Card from nGauge and insert into appropriate adapter to connect to PC.
      2. Place the downloaded files on the root of your SD Card. Do not rename the files.
          Older firmware files can stay.SD Root Directory
      3. Remove the SD Card from your computer and insert it into your powered-down nGauge.
      4. Apply power to the nGauge.
      5. Go to Step 2.
         
  2. Update the firmware via "Diagnostics > Settings > Update from SD". Wait for process to complete.
     
  3. New FW version should be displayed in "Diagnostics > Settings > Device Info".
     
    1. If the update is unsuccessful or not found, repeat the procedure.
    2. If the repeat fails, contact support@e-motionproducts.com.

 

 

Comments